Önemli VESTEL Üretimi tüm ürünler için FULL yazılım talep konusu
- Konuyu Başlatan By_Trol
- Başlangıç tarihi
1. Use another stick
2. Use a stick of max. 4Gb
3. Try another USB plug
4. If the LED flashes quickly it means that the software is charging
5. Don't get impatient !. It can take up to 10 minutes.
compact123
Aktif Üye
Teşekkürler , cihaz açıldı.
Thanks for your help.
I change my stick by a old 1Gb kingston datatraveler : Nothing with the file provided by jacobojacobo
I mistakenly used the file sent by By_trol (post 13596) and the TV start with a strange screen.
Thanks for your help.
I change my stick by a old 1Gb kingston datatraveler : Nothing with the file provided by jacobojacobo
I mistakenly used the file sent by By_trol (post 13596) and the TV start with a strange screen.
If you enter the service menu (menu 4725) can you distinguish where the USB Operations option is? It's the last one downstairs.
Merhaba arkadaşlar. Resimdeki ürün için full yazılım gerekiyor. 17MB140 kart.
ilgilnene arkadaşa tşk ederim. Saygılar
Cihazdaki arıza Regla yazısı geliyor.sonra gidiyor. yazılım denedim ama full yazılım belki istiyor diye düşünüyorum.
Yada bios yazmak gerekiyorda olabilir. onun dosyasını bulamadım. 25l12835f bios chip kullanıyor
Son düzenleme:
I think it will be possible but now i can't access to the menu, I'm blocked on the language selection screen.
Mesaj otomatik olarak birleştirildi:
kQue (en)
Ok, I'm in the menu. It was the wrong key on the remote control. Here is home. But it is not readble. Only few lines
at the top.
Son düzenleme:
jacabojacabo
Vip Üye
Copy the screen file from the service menu to the flash drive and transfer it here.TV would turn on if you tried the recovery software a few times.you haven't triedI think it will be possible but now i can't access to the menu, I'm blocked on the language selection screen.
Mesaj otomatik olarak birleştirildi:
kQue (en)
Ok, I'm in the menu. It was the wrong key on the remote control. Here is home. But it is not readble. Only few lines
at the top.
I'm completely blind.
I checked:
0 push on the down arrow key: some alphabet choice
1 push on the down arrow key: Audio Surround
2 push on the down arrow key: Last state ...
3 push on the down arrow key: menu begining by disabled
4 push on the down arrow key: Menu with OLM, Yes ...
5 push on the down arrow key: stats
6 push on the down arrow key:Menu yes, no, no
7 push on the down arrow key: Menu ok, ..., ...
8 push on the down arrow key: Write a power_up.log on the usb key
9 push on the down arrow key: return to some alphabet choice
1. Create a folder called downloadprofile.mb140 on the stickI think it will be possible but now i can't access to the menu, I'm blocked on the language selection screen.
Mesaj otomatik olarak birleştirildi:
kQue (en)
Ok, I'm in the menu. It was the wrong key on the remote control. Here is home. But it is not readble. Only few lines
at the top.
2. Insert the stick into the usb
3. Type menu 4725 and navigate down to the last line (last line is USB Operations).
4. Type OK and wait 10 seconds
5. Exit the menu and turn off the TV. When the left LED stops flashing, remove the stick
6. Post the files on the stick here.
7. Delete and create a folder called downloadpq.mb140
8. Repeat as above
If someone has saved the panel profile it is easily solved. If not, post the saved files and jacabojacabo helps.
Hi The software is installed according to the barcode on the back cover of the television. You have installed the software I gave to another member in my correspondence.Thanks for your help.
I change my stick by a old 1Gb kingston datatraveler : Nothing with the file provided by jacobojacobo
I mistakenly used the file sent by By_trol (post 13596) and the TV start with a strange screen.
Hi, I have the files. Many many thanks
There is a dropbox link:
Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.
I can't find the procedure via the forum
Linkteki yazılımı dener misin.
Merhaba arkadaşlar. Resimdeki ürün için full yazılım gerekiyor. 17MB140 kart.
ilgilnene arkadaşa tşk ederim. Saygılar
Cihazdaki arıza Regla yazısı geliyor.sonra gidiyor. yazılım denedim ama full yazılım belki istiyor diye düşünüyorum.
Yada bios yazmak gerekiyorda olabilir. onun dosyasını bulamadım. 25l12835f bios chip kullanıyor
Gizli içeriği görüntülemek için lütfen Giriş yapın veya Kayıt olun.
@Fritkot
If I give you 3 or 4 full software, would you try to install it, it might be suitable for your TV. You install and control one by one.