SPI for your combination. Try at your own risk.Merhaba! Vestel 32LE5000H'DEKİ ürün yazılımı ile ilgili yardım edin. fotoğraf ekliyorum. Formda da mümkündür. "25Q16 ve 25Q64 için bin" dosyaları (programlayıcı var)
Teşekkürler, ama işe yaramadı. LED "bekleme" yanıp sönüyor ve hepsi bu.
Did you rewrite the memories with the programmer?
yes, using CH341B
In 20 minutes you rewrote the memories and mounted them on the motherboard?
The memories cannot be read on the motherboard. Reading and rewriting will be erroneous. For correct rewriting, they must be removed from the mainboard.
I tried to write the firmware to the VESTEL from TOSHIBA. the TV started, but the image turned upside down and turned out to be of poor quality. Tomorrow I will try to solder the chips and flash them outside the board.
Panel issues can be fixed with the profile below.I tried to write the firmware to the VESTEL from TOSHIBA. the TV started, but the image turned upside down and turned out to be of poor quality. Tomorrow I will try to solder the chips and flash them outside the board.
I haven't studied TV so deeply yet. I don't know how to use these two files (profiles). Please drop the link where you can read about it.
It is written above in Turkish.I haven't studied TV so deeply yet. I don't know how to use these two files (profiles). Please drop the link where you can read about it.
Hurray!!! It's working! Thank you very much!!!
Good that the problem was solved.
