Önemli Vestel Mb82-Mb100-Mb110-Mb120-Mb130-Mb140-Mb211-Mb230 Güncelleme-Çekirdek Yazılım Konusu

TEKNOwest · 8 Nis 2019

M MarioB2B,

Unfortunately, we are unable to access the information since it is an exported device. If you see your business mb90 link to give mboot try.

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

ersan43 · 8 Nis 2019

güzel

MarioB2B · 8 Nis 2019

teknovest' Alıntı:
M MarioB2B,

Unfortunately, we are unable to access the information since it is an exported device. If you see your business mb90 link to give mboot try.

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

Thanks for your answer
It's sad to hear that.
I test the version, but the picture is reversed (but the color is better :alala

).
I Forgot an important information (maybe).
The chassis is a Vestel VES550UNES-2D-S01.
Very thanks

teraspy · 8 Nis 2019

MarioB2B' Alıntı:
Nop, you haven't this programmer

I have dumped, with little programmer, the content inside the SPI flash (U10) before all.

I tried to communicate with the console to launch manually a command on the U-BOOT or the linux.

But the nandflash is corrupted and the boot stopped with died services and the linux inside the board reboot systematicly.

Impossible to launch an USBOPERATIONS command to donwload the "hwprofile" or others files.

I have install a firmware 338c but i have a black screen or i have a reverse picture (incorrect EDID setting i think, it's not firmware for this model).

Thanks

Tv modeli nedir ?

teraspy · 8 Nis 2019

MarioB2B' Alıntı:
Thanks for your answer
It's sad to hear that.
I test the version, but the picture is reversed (but the color is better ).
I Forgot an important information (maybe).
The chassis is a Vestel VES550UNES-2D-S01.
Very thanks

47PF9090 -338c benim tv yazılımıdır,veya edit dosyasını da vereyim dene bakalım :ok

MarioB2B · 8 Nis 2019

teraspy' Alıntı:
Tv modeli nedir ?

TELEFUNKEN
P/N : TFR55243FHD100B
S/N : 7245775 400162 10093220 1409
Number of mainboard : 10093220 23229532
MB9x version 338c
The chassis is a Vestel VES550UNES-2D-S01

teraspy · 8 Nis 2019

M MarioB2B
Edit.edit

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

MarioB2B · 9 Nis 2019

teraspy' Alıntı:
M MarioB2B
Edit.edit

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

Hello,
Thanks.
That don't work ... But that help me !!
The edid is correct on spi flash u10, and is correct (ves 55" FHD-LCD) but the panel setting is wrong.
I found that chassis is similar to the TELEFUNKEN L55F243N3C.
This model has same panel, same mainboard, and I found all profile files on another forum (by chance?? :affet

).
It's very late to test this today.
I think that better is a full recovery with a 338c firmware for another model (but for mb91-2 mainboard) and relaoding the profile for ves550unes chassis on usb, with USBOPERATIONS command on terminal if I have a black screen ... I can dream if that works !! :gul

I see tomorrow to test that.
If I can and, if that works, I will send this profile files, if that can help anyone.
Thanks and good night

teraspy · 9 Nis 2019

MarioB2B' Alıntı:
Hello,
Thanks.
That don't work ... But that help me !!
The edid is correct on spi flash u10, and is correct (ves 55" FHD-LCD) but the panel setting is wrong.
I found that chassis is similar to the TELEFUNKEN L55F243N3C.
This model has same panel, same mainboard, and I found all profile files on another forum (by chance?? ).
It's very late to test this today.
I think that better is a full recovery with a 338c firmware for another model (but for mb91-2 mainboard) and relaoding the profile for ves550unes chassis on usb, with USBOPERATIONS command on terminal if I have a black screen ... I can dream if that works !!
I see tomorrow to test that.
If I can and, if that works, I will send this profile files, if that can help anyone.
Thanks and good night

Hımm,saat :03:50

birde 55'' vestel 362j vereyim,yine kendi kullandığım ve edid.edid verdiğim full yazılım,umarım işe yarar,madem yarın bakarsın sevgili MarioB2B :ok

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

yokoono · 9 Nis 2019

Can help these profiles

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

fikoloji · 9 Nis 2019

jcrew' Alıntı:
Buyrun Hocam çok eşekkür ederim ilgi ve alakanıza

full yazılımınız:

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

full yazılım yükleme anlatımı için Tıklayınız

MarioB2B · 10 Nis 2019

Hello everybody !

Wonderfull, that's work ! :clap

teraspy' Alıntı:
Hımm,saat :03:50
birde 55'' vestel 362j vereyim,yine kendi kullandığım ve edid.edid verdiğim full yazılım,umarım işe yarar,madem yarın bakarsın sevgili MarioB2B

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

But I just tried with the firmware 338c for mb91 (i dont test with another version at this time).

yokoono' Alıntı:
Can help these profiles

Ziyaretçiler için gizlenmiş link,görmek için Giriş yap veya üye ol.

Yes

, it's the package that i was talking yesterday, that i found on another forum.
In fact, the configuration files for the panel and etc, is the "pq" package.
I put the "profile" "pq" folder (no "spi" because my flash spi was ok) and that's done !
I found the correct setting for my panel Vestel VES550UNES-2D-S01 !!

I don't know the "pq" file. It's obtain with the file downloadpq.md90, for my board (as downloadpq.mdxx) ...

Wow
Very thanks for your help, dudes !! :ok

Best regards

fromhell6607 · 10 Nis 2019

Ado' Alıntı:
[Gizli İçerik]

yokoono · 10 Nis 2019

MarioB2B' Alıntı:
Hello everybody !

Wonderfull, that's work !

But I just tried with the firmware 338c for mb91 (i dont test with another version at this time).

Yes , it's the package that i was talking yesterday, that i found on another forum.
In fact, the configuration files for the panel and etc, is the "pq" package.
I put the "profile" "pq" folder (no "spi" because my flash spi was ok) and that's done !
I found the correct setting for my panel Vestel VES550UNES-2D-S01 !!

I don't know the "pq" file. It's obtain with the file downloadpq.md90, for my board (as downloadpq.mdxx) ...

Wow
Very thanks for your help, dudes !!
Best regards

I'm glad you did it and it's okay.
Greetings from Romania.