Önemli Vestel Ve Üretimleri Panel Yazılımları Talep Başlığı

yokoono · Bugün 14:01

thelinux' Alıntı:
Yes,17MB96

For 17MB96 and VES490UNDS-2D-N13 panel, I don't have a panel profile.
1. What problem does the image have?
2. Save the panel profile from the TV and post it here.

thelinux · Bugün 14:59

yokoono' Alıntı:
For 17MB96 and VES490UNDS-2D-N13 panel, I don't have a panel profile.
1. What problem does the image have?
2. Save the panel profile from the TV and post it here.

The motherboard is dead.So I put another motherboard.İt is 17MB-96.But the screen is Negative.I try this solution:'Panels with cards between MB90-MB96: VESTEL_D1_Plus_PNL.bin file will be edited. If line 9880 is 0, set it to 1, if it is 1, set it to 0 If line 9932 is 0, set it to 1, if it is 1, set it to 0, or you can find these two lines by experimenting.' But the panel has been not fixed.Do you have repair method?

yokoono · 16 dakika önce

thelinux' Alıntı:
The motherboard is dead.So I put another motherboard.İt is 17MB-96.But the screen is Negative.I try this solution:'Panels with cards between MB90-MB96: VESTEL_D1_Plus_PNL.bin file will be edited. If line 9880 is 0, set it to 1, if it is 1, set it to 0 If line 9932 is 0, set it to 1, if it is 1, set it to 0, or you can find these two lines by experimenting.' But the panel has been not fixed.Do you have repair method?

After copying the profile to the TV:
1. Exit SM
2. Turn off the TV from the remote control
3. The stby LED on the TV flashes. Wait until it becomes solid.
4. Unplug the TV
5. Wait until the stby LED goes out.
6. Turn on the TV and when it's ok, remove the stick.
If there is no change, repeat the operation or try with a very small capacity stick.