Önemli Vestel Ve Üretimleri Panel Yazılımları Talep Başlığı
- Konbuyu başlatan By_Trol
- Başlangıç tarihi
-
- Etiketler
- vestel panel vestel panel yazılım
Çevrimdışı
By_Trol
Administrator
- 24 Ağu 2019
- 15,525
Panel yazılımını full yazılımın içerisindedir. Sonradan yüklenen panel yazılımı ana karta yüklenir.
Çevrimdışı
yokoono
TFC Team
- 20 Mar 2019
- 2,803
- 73
I'm still looking for a TELEFUNKEN boot logo (spi profile) for the 17MB110P motherboard. This is what the logo looks like:
Çevrimdışı
yokoono
TFC Team
- 20 Mar 2019
- 2,803
- 73
Case solved. It can be archived in the TV LOGO section. Many thanks By_Trol.
Çevrimdışı
yokoono
TFC Team
- 20 Mar 2019
- 2,803
- 73
I have one more request. The Telefunken TV had the 17MB95 motherboard. I replaced it with 17MB110P. Panel VES390UNDC-01. I tried several full software and several panel profiles. I didn't manage to get a perfect picture. Only an acceptable one. The writing looks as if it has been crossed out. I don't think I will find the correct panel profile (or full software) for MB110P and VES390UNDC-01 panel, but I'm asking. Thanks in advance.
Çevrimdışı
By_Trol
Administrator
- 24 Ağu 2019
- 15,525
You're welcome There is logo in the archive.
Çevrimdışı
By_Trol
Administrator
- 24 Ağu 2019
- 15,525
If available, install MB211 Motherboard. I think MB110 is not compatible.I have one more request. The Telefunken TV had the 17MB95 motherboard. I replaced it with 17MB110P. Panel VES390UNDC-01. I tried several full software and several panel profiles. I didn't manage to get a perfect picture. Only an acceptable one. The writing looks as if it has been crossed out. I don't think I will find the correct panel profile (or full software) for MB110P and VES390UNDC-01 panel, but I'm asking. Thanks in advance.
Çevrimdışı
yokoono
TFC Team
- 20 Mar 2019
- 2,803
- 73
OK. I try.
Çevrimdışı
yokoono
TFC Team
- 20 Mar 2019
- 2,803
- 73
I have one more question. On some motherboards (eg 17MB110) the backlight value, depending on the image profile chosen, is 85, 90 or 100. I searched in swprofile to change something that would allow me to adjust the backlight value manually (0-100) . Can it be solved?
Çevrimdışı
By_Trol
Administrator
- 24 Ağu 2019
- 15,525
Within the profile, you can set natural, dynamic, cinema and game options to the standards you want. I don't remember if there is an option for LED lighting, I will check it at a convenient time.
Google translate
Çevrimdışı
yokoono
TFC Team
- 20 Mar 2019
- 2,803
- 73
True. Depending on the choice of dynamic, standard, etc. the backlight value changes to 85, 90, 100. The values are preselected. They cannot be adjusted manually with other values. I didn't find anything in swprofile that was useful. Nor in manual service.
E
Çevrimdışı
emtasservis
Yeni Üye
- 28 Mar 2020
- 24
- 44
Merhaba resimlerini paylaştığım cihazda ekran ters gösteriyor , elinizde varsa panel yazılımı rica edebilir miyim , teşekkürler .
