17MB211S LOGO JVC

  • Konuyu Başlatan Konuyu Başlatan bubul
  • Başlangıç tarihi Başlangıç tarihi
B

bubul

Yeni Üye
Puan 18
Çözümler 0
Katılım
15 Eyl 2018
Mesajlar
37
Yaş
58
bubul
I need help after you replaced the main board from Hitachi on JVC tv, the Hitachi logo appears, now I need the JVC logo file, can you send me the procedure is like that but I only need the JVC logo file.
thank you

Boot Logo Update
1. Create "spi" folder into the USB root.
2. Copy your jpeg format file into the "spi" folder which is located on USB, and rename this file as "boot_logo.bin". (Jpeg is natively supported as boot logo. So, you do not need to convert jpeg with any external tool.)
3. Plug the USB to TV's USB-1 port.
4. Make "USB operations" from the service menu.
5. New files will be updated after power off/on.
 
@bubul Can you add the barcode image on the back cover of the TV here
 
@bubul
Logo link
?
Gizli içeriği görüntülemek için lütfen Giriş yapın veya Kayıt olun.

Boot logo update
Extract the spi folder from the zip
Copy into an empty USB flash drive
Insert the USB stick into the USB port of the TV
Press MENU 4 7 2 5 on the remote control
Go to the "USB operations" line in the service menu and press OK.
The new logo will be uploaded after power on / off.
 
Son düzenleme:
JVC.jpg
 
@bubul
Hello have you installed the logo software?
 
By_Trol' Alıntı:
@bubul
Logo link
?
*** Gizli metin: alıntı yapılamaz. ***


Boot logo update
Extract the spi folder from the zip
Copy into an empty USB flash drive
Insert the USB stick into the USB port of the TV
Press MENU 4 7 2 5 on the remote control
Go to the "USB operations" line in the service menu and press OK.
The new logo will be uploaded after power on / off.
Genişletmek için tıkla ...
merhaba hocam linkin süresi dolmuş yeniden paylaşabilirmisiniz?
 
Cevap yazmak için giriş yap yada kayıt ol.
Geri
Üst Alt